Linear Phase EQ in Mastering


Introduction to the EQ Used in the Mastering Tutorials

The chapter 'What is Audio Mastering' should have given you a rough idea about what we are trying to achieve when mastering music. The next step is to explore the idea of shaping a track from a spectral point of view. Throughout this chapter you will realise some of the very purposes of the mastering process. You'll be presented with an idea of where to start, and you'll begin to clearly imagine the final sound of which you are trying to achieve when mastering your own, or other artist's music.

The process of tonal adjustment is mostly achieved using an EQ, something you're probably familiar with already. EQ is possibly the most important tool in the box. Whether you mix or master, operate live sound or configure PA systems, EQ is an absolute necessity to do your job. As you can probably guess there are many different types – parametric, graphic, linear phase, passive and active. Essentially they all have the same goal of attenuating or boosting a specific band of frequencies chosen by the user. They can appear in either hardware or software form too. As this mastering tutorial is aimed at showing you how to achieve a professional finish with standard plugins, we'll be leaving the hardware EQ's (or analogue) for another time.

Below is an image of the linear phase EQ we shall use for demonstration – Logic's own Linear Phase EQ

An explanation of the term 'linear phase' is probably a little beyond the level of the mastering tutorial at this stage. For now, let me just say that adjusting the controls on any EQ will project an artefact across the rest of the spectrum and can be perceived in the form of distortion. In simple terms, linear phase means the process that causes this artefact has been adjusted to generate less distortion, making it more suitable for mastering.

Linear Phase EQ by Apple's Logic

linear phase EQ

I will assume that you are familiar with what the frequency spectrum is, and have at least some experience of altering the tone of a sound using EQ.

The controls from one equaliser to another do not vary much. You have a choice of bands, each set at a different frequency. For each you can adjust the gain or slope, the frequency and the Q. The gain will boost or attenuate a given frequency and the slope will adjust the gradient (this will be illustrated further on). The frequency is pretty obvious, it's the point where all the action is happening. The Q can be used to narrow and widen, or to shape the affected area of the spectrum. Q actually stands for Quality Factor and so it follows that the higher the quality, the more precise the affected area of the spectrum will be.

David Eley - TGM Audio

Next Page... Mastering EQ, Tone & The Frequency Spectrum Tutorial